to follow, share, and participate in this community.
The ATLAS products with the Video Module are “Layer 1” devices used to provide a WAN link for video codec systems along with the KIV-7 or other secure/encrypted systems. This is the recommended configurati... ATLAS Factory Default Procedure In order to factory default the ATLAS you will need a serial connection to the CRAFT port (on the ATLAS 830 it needs to be the back ADMIN port) with the following settings: ... ATLAS Password Reset The default password for the ATLAS is "password". If you have changed the password and cannot access the unit you will have to reset the default password on the ATLAS. To... ATLAS Configuration files: ATLAS Safe-T-Net configuration files Q: Can I have multiple circuits with independent timing sources connected to my ATLAS? A: Yes, although how well this works depends on the accuracy of the clock sources. For a detailed discussion of this... Q: Are the ATLAS 550 modules and the ATLAS 800 modules interchangeable? A: No. Q: Are the option modules for the ATLAS hot-swappable.? A: Yes, This means that modifications can be made to the base uni... These file are mentioned in the ATLAS Common Documentation Document: Configuring the ATLAS for a Primary Rate ISDN (PRI) to T1 Robbed Bit Signaling (RBS) Conversion See CFG files for ATLAS PRI to RBS Conversion for example configuration files. Configuration files for ATLAS Safe-T-Net Frame Relay Dial Backup. See Safe-T-Net Frame Relay Dial Backup with ATLAS and the IQ series for more information.
Get a feed of this content