• Need to change out an LIU PN-1180009L2  would a LIU PN-1180109L2 be compatible?

    Need to change out an LIU PN-1180009L2  would a LIU PN-1180109L2 be compatible?
    rgsmith
    last modified by rgsmith
  • Adding SNMP monitoring of our TA1500 chassis

    Hello We have about 200 TA1500 T1 chassis connected in our network providing 4w DSO and POT,E&M for our 911 system. We would like to add SNMP to trap error conditions and alarms in the field 97% of the units hav...
    chicago911
    last modified by chicago911
  • Using 2 Primary, Secondary -54volt power sources with the TA1500

    Hi Guys-   I have a question for everyone here on the forum. We are using the TA1500 channel units with our Police, Fire, EMS radio transmitters across the fine City of Chciago. Presently most of our sites use g...
    chicago911
    last modified by chicago911
  • Bogus Threshold Alarms

    Has anyone else experienced this problem, or have any ideas on how to resolve it? Several times I have received SNMP traps indicating that a threshold has been exceeded.   Community:SNMP_trap   Variab...
    mburns
    last modified by mburns
  • Where can I find TA 1500 TL1 reference info?

    I am looking for the format of the AIDs used in the TL1 commands/responses of the TA 1500, 23" and 19" shelves (also the TA 850). Does the format follow the format of other equipment? <shelf>-<slot>-<EQ...
    adcfmhcc
    last modified by adcfmhcc
  • Getting dsx1almNearQtrThrs---exeedalarms from a disabled T-1

    I have a TA1500 with a dual T-1 LIU, the B side is disabled.  A few days ago I started getting threshold exceeded SNMP traps from the B side.  The daily PM shows all 0s.  The Qtr-Hour shows two interval...
    mburns
    last modified by mburns