• TA-1500 DSO Pinouts

    In the manual Pins one and two on a 4 wire E&M to are "customer transmit" 7& 8 are "customer receive". By customer transmit does this mean transmit to the "customer" premise equipment or "customer" transmit ov...
    michaelc
    last modified by michaelc
  • Bogus Threshold Alarms

    Has anyone else experienced this problem, or have any ideas on how to resolve it? Several times I have received SNMP traps indicating that a threshold has been exceeded.   Community:SNMP_trap   Variab...
    mburns
    last modified by mburns
  • Where can I find TA 1500 TL1 reference info?

    I am looking for the format of the AIDs used in the TL1 commands/responses of the TA 1500, 23" and 19" shelves (also the TA 850). Does the format follow the format of other equipment? <shelf>-<slot>-<EQ...
    adcfmhcc
    last modified by adcfmhcc
  • TA-1500 channels units

    I have a TA-1500 that over half the channel units are damaged,12 last week in one storm.Any ideas
    pipete
    last modified by pipete
  • Getting dsx1almNearQtrThrs---exeedalarms from a disabled T-1

    I have a TA1500 with a dual T-1 LIU, the B side is disabled.  A few days ago I started getting threshold exceeded SNMP traps from the B side.  The daily PM shows all 0s.  The Qtr-Hour shows two interval...
    mburns
    last modified by mburns
  • TA 1500 4 wire circuits

    Has anyone worked with installing a four wire circuit across one TA1500 to another/  I am having trouble getting the circuit to work without errors.  I am currently trying E&M/TO cards (118402L1) and can...
    thelma
    last modified by thelma
  • Looking for definitions for SNMP traps for TA 1500, Opti-6100 & MX408e.  Any suggestions?

    Looking for definitions for SNMP traps for TA 1500, Opti-6100 & MX408e.  Any suggestions?
    mburns
    last modified by mburns