DSU III S2W AT Commands

Version 1
    Article ID: 1591
    Q&A

     

     

      DSU III S2W AT Commands


     

    Q:

    DSU III S2W AT Commands

     

     

    A:

    The following chart can also be found in the DSU III S2W User Manual, Appendix A.

    CommandTitleDefault
    A/Re-execute Commandnone
    ATAAnswernone
    ATADDial Auto Dial Numbernone
    ATDnDial Numbernone
    ATDSnDial Stored Number Reg nnone
    ATEEcho Command0=disable
    ATHHang Up Callnone
    ATLVolume Control0=off
    ATOGo Onlinenone
    ATPA=xStore Phone Number (auto dial)none
    ATPSn=xStore Phone Number (speed call)none
    ATQnResult Code Display1=disable
    ATRIRing Again Control0=disable
    ATSn?Read S Registernone
    ATSCnDial Speed Call Reg nnone
    ATSn=xWrite to S Registernone
    ATTLT-Link Adapt Control1=enable
    ATVnResult Code From1=long form
    AT&CnDCD Option1=normal
    ATZResetnone
    CommandTitleDefault
    AT&DnDTR Option2=idle when off
    AT&FnRestore Factory Optionsnone
    AT&LnNetwork Echo Canceler2=enable for answer
    AT&QnDTE Data Format2=synchronous
    AT&RnCS Options1=follows RS
    AT&SnSR Options1=off test + idle
    AT&TnTest Commands0=no test
    AT&VView Current Configurationnone
    AT&WnStore User Profile0=profile 0
    AT&XnTransmit Clock0=internal
    AT&YnPower Up User Profile0=profile 0
    AT&Zn=xStore Phone Numbernone
    AT%KnDTE Rate Select8=56 kbps
    AT_AnLLB Control0=disable
    AT_CnSR Control During Test0=off in test
    AT_DnRTS-CTS Delay0=short
    AT_JnAuto Answer Enable/Disable0=disable
    AT_PnFront Panel Enable/Disable1=enable
    AT_RnRLB Control0=disable
    AT_S=xxSet Serial Numbernone
    AT_TnSelect Test Pattern0=2047

     

     

    If you experience any problems using your ADTRAN product, please contact ADTRAN Technical Support.