Total Access 9XX - SIP to PRI sample configuration

Version 5

     

    Total Access 9XX - SIP to PRI sample configuration

     

    The sample configuration below is designed to be used as a basic voice configuration template for a SIP to PRI application on a Total Access 9XX series. It is assumed that the routing features of the IPBG have already been configured. For more information about configuring IP interfaces for AOS voice applications, see this guide:Configuring IP Interfaces for SIP in AOS IPBGs . Before pasting the config at the privileged (enable) prompt of the command line, replace <INSERT_SIP_SERVER ADDRESS> with the IP address (or hostname) of the SIP server. For information on how to access the command line and enable prompt, see Accessing the Command Line Interface in AOS

     

    !

    configure terminal

    !

    ! PRI TRUNK CONFIGURATION

    !

    interface t1 0/2

      tdm-group 1 timeslots 1-24

      no shutdown

    !

    interface pri 1

      connect t1 0/2 tdm-group 1

      no shutdown

    !

    isdn-group 1

      connect pri 1

    !

    voice trunk T02 type isdn

      connect isdn-group 1

    !

    voice grouped-trunk PRI

      trunk T02

      accept $

    !

    ! SIP TRUNK CONFIGURATION

    !

    voice trunk T01 type sip

      sip-server primary <INSERT_SIP_SERVER_ADDRESS>

    !

    voice grouped-trunk SIP

      trunk T01

      accept $

    !

    exit

    exit

    write

    !

    For more detail, see the guides here:

    Total Access 900 900e SIP Trunk Quick Configuration Guide

    Total Access 900 900e PRI Trunk Quick Configuration Guide