I am receiving a 20MB space error when attempting to upload AP firmware to the BSC. What can I do to prevent receiving this error?

Version 1

    Q: I am receiving a 20MB space error when attempting to upload AP firmware to the BSC. What can I do to prevent receiving this error?


    A: When attempting to upload AP firmware to the BSC under wireless>firmware the following error may be received:

    "Only 20MB of space is available for upload"

     

    The BSC has 20 MB of space allocated for AP firmware. If the above error is received perform the following:
    1. Delete the previous version of AP firmware under wireless>firmware BEFORE attempting to upload new AP firmware.
    2. Delete any un-used firmware. For example the BSC software image includes BSAP-1800v2/1840 and BSAP-1800v1 AP firmware. Perhaps you only have BSAP-15XXs. If so you could delete the 18XX firmware to make room for the BSAP-15XX Firmware
    3. If you have more than 2 BSAP model types you may be required to swap AP firmware as needed when bringing up new BSAPs for the first time or alternatively configure the BSC to store AP firmware on a TFTP server external to the BSC.