cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

Bridge between two NV 3200's?

Jump to solution

I have a very simple application, but I am not sure exactly how to set it up. I have a point to point T1 across town with two IP devices that need to talk to one another. There are no other routers or networking, I can use any addressing or protocol. I just need device A to talk to B, closed network. On side A the netvanta is 10.10.10.1 and the device is 10.10.10.10 and I need it to talk to side B, netvanta is 10.10.10.2 and the device is 10.10.10.11. What is the simplest way to do this over a P2P T1, using PPP or Frame Relay? and I am not exactly sure how to set up a bridge. Any application documents? Thanks! - Jeremy

Labels (1)
Tags (1)
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Bridge between two NV 3200's?

Jump to solution

Never mind, I found the thread and document on Bridges and got it going. Thanks! - Jeremy

View solution in original post

0 Kudos
1 Reply
Anonymous
Not applicable

Re: Bridge between two NV 3200's?

Jump to solution

Never mind, I found the thread and document on Bridges and got it going. Thanks! - Jeremy

0 Kudos