cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

Adtran 3120 - Port forwarding - Sip Traffic

I ran into this before to where the Adtran Router is interfering with sip traffic when I have a Pbx behind it with port forwading - 5060 and RTP port forward to the phone system.  Does anyone know what I can do to tell the traffic to leave all sip and rtp traffic alone, just port forward it?

I have sip alg turn off already.

This happen to me on asterisk phone system and NEC phone system.

0 Kudos
5 Replies
jayh
Honored Contributor
Honored Contributor

Re: Adtran 3120 - Port forwarding - Sip Traffic

Did you try "no ip sip" in global config mode?

How is it interfering?  What do you want to happen and what is actually happening? 

Anonymous
Not applicable

Re: Adtran 3120 - Port forwarding - Sip Traffic

Yes, I tried that and all the call between the vpn have no audio.  Here is what I’m geeting from suppor

The no matching peer means that there’s no trunk set up with the senders IP address. That trunk exists from what I can see so the problem is probably network related. If he can replicate the issue, have him do a packet capture on the call that fails.


tcpdump -s 0 -w /tmp/tcpdump.cap

then replicate the issue, after the test call is rejected, hit ctrl+c to stop the tcpdump program

send me the /tmp/tcpdump.cap file. I’ve seen a case in the past where a user’s network was shaping the sip traffing and putter the gateways IP address in the IP Header field instead of the sip providers WAN address that the packet originated from. I suspect something similar may be happening. Also send me the verbose logs in /var/log/asterisk/full

jayh
Honored Contributor
Honored Contributor

Re: Adtran 3120 - Port forwarding - Sip Traffic

When you disable the SIP handling in the 3120, then the IP address within the SIP packet for RTP won't match the source address going through NAT.  You'll need to set it up as NAT=YES on the Asterisk platform in this case.

If the 3120 is handling SIP fixup, then Asterisk will want to be set up as NAT=NO.

Anonymous
Not applicable

Re: Adtran 3120 - Port forwarding - Sip Traffic

Thanks Jay, I will try that.

Anonymous
Not applicable

Re: Adtran 3120 - Port forwarding - Sip Traffic

-

I went ahead and flagged this post as "Assumed Answered". If any of the responses on this thread assisted you, please mark them as Correct or Helpful as the case may be with the applicable buttons. This will make them visible and help other members of the community find solutions more easily. If you have any additional information on this that others may benefit from, please come back to this post to provide an update. If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.


Thanks,

Noor