cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
dkmet
New Contributor

How to do SNMP monitoring for 1920 APs?

Jump to solution

We are using an SNMP monitoring tool and want to be able to monitor individual APs. How can we achieve this? Please advice.

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: How to do SNMP monitoring for 1920 APs?

Jump to solution

Currently, SNMP is not supported by the access points.  I am happy to inform you that there is already an open feature request for this ability.  You could use the SNMP Trap Notifications on the vWLAN to alert you about the APs based on the pre-configured Info Messages found under Configuration > Notifications.

View solution in original post

0 Kudos
2 Replies
Anonymous
Not applicable

Re: How to do SNMP monitoring for 1920 APs?

Jump to solution

Currently, SNMP is not supported by the access points.  I am happy to inform you that there is already an open feature request for this ability.  You could use the SNMP Trap Notifications on the vWLAN to alert you about the APs based on the pre-configured Info Messages found under Configuration > Notifications.

0 Kudos
Anonymous
Not applicable

Re: How to do SNMP monitoring for 1920 APs?

Jump to solution

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post to unmark it and select another in its place with the applicable buttons.  If you have any additional information on this that others may benefit from, please come back to this post to provide an update.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,


Nick