cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
mwh
New Contributor

Extension to Extension calls will not ring

Jump to solution

After upgrading a Netvanta 7100 to Firamware R10.10.0.E, extension to extension calls will not ring. The calls are getting to the phone but you don't get an audible ring. All the phones are Adtran IP 650 phones.

Thanks, Mike

Labels (1)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Extension to Extension calls will not ring

Jump to solution

What version of firmware are these Polycom phones running?  The state that they must be running 3.2.7 or later.  If the phone firmware is up to date, can you check the Voice > Ring Options page and see what that is set to?  If everything is normal there, try defaulting one of these phones by holding down 4,6,8, and * all at the same time upon bootup.  When it prompts you for a password enter 456, and then the phone will default and attempt to download all of its configuration files again.  If the problem still exists after that, I will need to see the current configuration of the unit along with the output of a debug voice verbose and debug sip stack messages both enabled at the same time while you recreate the issue.  You can use the instructions below to submit files to our FTP server:


Open Internet Explorer web browser on their PC
Type the following URL:  ftp://ftp.adtran.com


Press the Alt key, click View, and then click Open FTP Site in Windows Explorer


Double-click the "Incoming" folder
Drag and drop files from PC into the Internet Explorer window


Reply to this post with the exact filenames used so we can retrieve the files



Thanks,

Matt

View solution in original post

0 Kudos
1 Reply
Anonymous
Not applicable

Re: Extension to Extension calls will not ring

Jump to solution

What version of firmware are these Polycom phones running?  The state that they must be running 3.2.7 or later.  If the phone firmware is up to date, can you check the Voice > Ring Options page and see what that is set to?  If everything is normal there, try defaulting one of these phones by holding down 4,6,8, and * all at the same time upon bootup.  When it prompts you for a password enter 456, and then the phone will default and attempt to download all of its configuration files again.  If the problem still exists after that, I will need to see the current configuration of the unit along with the output of a debug voice verbose and debug sip stack messages both enabled at the same time while you recreate the issue.  You can use the instructions below to submit files to our FTP server:


Open Internet Explorer web browser on their PC
Type the following URL:  ftp://ftp.adtran.com


Press the Alt key, click View, and then click Open FTP Site in Windows Explorer


Double-click the "Incoming" folder
Drag and drop files from PC into the Internet Explorer window


Reply to this post with the exact filenames used so we can retrieve the files



Thanks,

Matt

0 Kudos