cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
gregstahl
New Contributor III

Help with a TA912 Config

Jump to solution

Hello All,

I'm trying to get the web interface working on a new TA912, for some reason, I can't web into it...missing something in the config...

Config is attached.

Thanks,

Greg

0 Kudos
1 Solution

Accepted Solutions
jayh
Honored Contributor
Honored Contributor

Re: Help with a TA912 Config

Jump to solution

It looks like it should work.  A2.06 is getting kind of long in the tooth for 2nd Gen units, you might want to move to the latest R10.9.x code.

What happens when you try to initiate a web session?  Timeout, error message, etc.? Note that the error messages returned by some browsers are beyond worthless in terms of interpreting the problem. (I'm talking about you, MSIE.)  Can you telnet or ssh into the box on the same IP?

Other things to check:

Browser problem - have you tried a different one or a telnet to port 80?

DNS issue, have you tried inserting the IP of the box into the browser window?

Clear browser cache and cookies.

View solution in original post

0 Kudos
2 Replies
jayh
Honored Contributor
Honored Contributor

Re: Help with a TA912 Config

Jump to solution

It looks like it should work.  A2.06 is getting kind of long in the tooth for 2nd Gen units, you might want to move to the latest R10.9.x code.

What happens when you try to initiate a web session?  Timeout, error message, etc.? Note that the error messages returned by some browsers are beyond worthless in terms of interpreting the problem. (I'm talking about you, MSIE.)  Can you telnet or ssh into the box on the same IP?

Other things to check:

Browser problem - have you tried a different one or a telnet to port 80?

DNS issue, have you tried inserting the IP of the box into the browser window?

Clear browser cache and cookies.

0 Kudos
gregstahl
New Contributor III

Re: Help with a TA912 Config

Jump to solution

Hi Jay,

It works now, the config is good...it turns out that the static IP on our edge equipment was not working.  I reloaded our edge gear and it is reachable now.

Should have checked that first...thanks for looking at this.

Greg