cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
heimiko
New Contributor

BSAP 1840 on very old firmware - how to update?

Hi All!

I'm new to the world of BSAP's and vWLAN's.

I obtained 2 1840 units, to try out vWLAN.

I'm running vWLAN 2.3 (VMware) and uploaded the corresponding 1840 firmware file, and had set it to be the default.

When I hooked them up, in vWLAN I could see them under "AP Licenses", but they won't appear under "Access Points".

They were new in box, but they'd been gathering dust for a while apparently, as I discovered that they were running firmware "1.0.0-9".

When logging into the BSAP with SSH, it tells me that the state is "Communicating with the BNC", so that looks good?

Apparently, this firmware doesn't get uploaded to the BSAP automatically for some reason.

I do have to say, I haven'r applied any licenses yet, but shouldn't they be showing elsewhere even without a valid license?

I'm desperate to figuring this out. 

Anyone any ideas on how to proceed?

Thanks!

0 Kudos
3 Replies
Anonymous
Not applicable

Re: BSAP 1840 on very old firmware - how to update?

I think the license needs to be loaded first before the AP will do a firmware load, and do you have the firmware for the 1800v2/1840 loaded on your vWLAN?

heimiko
New Contributor

Re: BSAP 1840 on very old firmware - how to update?

I have indeed loaded the 1840 firmware onto my vWLAN (as described in my initial post).

Can this be confirmed by someone, that one needs to add licenses before they'll start updating?

Anonymous
Not applicable

Re: BSAP 1840 on very old firmware - how to update?

Yes. You must upload a license. Please see the for more details.