cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
zorper
New Contributor

SIP "Privacy: id" header not passing through 3430 in eSBC configuration

Jump to solution

Hello,

I am using a 3430 as an eSBC to connect a PBX to a carrier SBC using SIP trunks.  When the PBX makes a privacy call, I see the "Privacy: id" header included in the PBX originated INVITE.  However, I do not see the "Privacy: id" header in the INVITE generated by the 3430 going to the carrier SBC.  Cisco has the "privacy-policy passthru" command.  Is there an equivilent in AOS?

Thanks.

Labels (1)
Tags (3)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: SIP "Privacy: id" header not passing through 3430 in eSBC configuration

Jump to solution

Zorper,

Thanks for the question. There are a couple of commands you need to enable to pass the privacy through to the carrier SIP trunk.

First, make sure you have the "sip privacy" command configured globally. Second, put the command "trust-domain" on the SIP trunk facing the PBX and the SIP trunk facing the provider. That should do it!

Thanks,

Rob

View solution in original post

0 Kudos
2 Replies
Anonymous
Not applicable

Re: SIP "Privacy: id" header not passing through 3430 in eSBC configuration

Jump to solution

Zorper,

Thanks for the question. There are a couple of commands you need to enable to pass the privacy through to the carrier SIP trunk.

First, make sure you have the "sip privacy" command configured globally. Second, put the command "trust-domain" on the SIP trunk facing the PBX and the SIP trunk facing the provider. That should do it!

Thanks,

Rob

0 Kudos
zorper
New Contributor

Re: SIP "Privacy: id" header not passing through 3430 in eSBC configuration

Jump to solution

That did it.  Thanks much!