cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
darkjacket
New Contributor

No Long Distance - PRI (Stripping 1?)

Jump to solution

I have a Netvanta 7100 connected to a PRI.  Getting the "must dial a 1 or zero when dialing this number" when placing long distance calls.  It looks like it is stripping the 1 when placing the call.

Local and internal calls work fine, setup for 7 digit dialing.

Labels (1)
Tags (3)
0 Kudos
1 Solution

Accepted Solutions

Re: No Long Distance - PRI (Stripping 1?)

Jump to solution

I found a work-around for this - DNIS substitution 1NXXNXXXXXX  --->  11NXXNXXXXXX

View solution in original post

0 Kudos
2 Replies

Re: No Long Distance - PRI (Stripping 1?)

Jump to solution

I found a work-around for this - DNIS substitution 1NXXNXXXXXX  --->  11NXXNXXXXXX

0 Kudos

Re: No Long Distance - PRI (Stripping 1?)

Jump to solution

I actually found, likely the true correct answer.

Adtran ships the box with ISDN Number Templates applied.  You can access the page from the webui Voice->ISDN Num Templates   In there it states:

ISDN Number Templates look similar to standard dial plan templates but are used exclusively by ISDN-based trunks to recognize dialed numbers as a particular type of call. Additionally, if a prefix is specified, then the number template matches against that prefix as well but strips those digits before sending the number.

There is a default template in there for National calling with a Prefix of 1 and then NXX-NXX-XXXX.  According to this Num Template rule the 1 is stripped from the message sent out the PRI when you have a dnis of 1-NXX-NXX-XXXX

Then best thing is to delete this rule from the webui or from the CLI with the following command:

no isdn-number-template 6 prefix 1 national NXX-NXX-XXXX