cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

Adtran 908e SIP to PRI

Is there any way to configure the PRI to go Out Of Service(Drop the D Channel) if the SIp circuit goes OOS or the router loses communication with the SIP Host?

My PBX never shows the PRI going out of service so when the circuit goes out we cannot fail over to our backup POTS lines

Thanks

JP

Labels (2)
Tags (2)
2 Replies
Anonymous
Not applicable

Re: Adtran 908e SIP to PRI

Yes.

Here is how I set it up:

probe drop-trunk icmp-echo

destination

period 5

tolerance consecutive fail 3 pass 2

no shutdown

!

track test-track

snmp trap state-change

test if probe drop-trunk

no shutdown

!

!

voice trunk T01 type isdn

description "PRI"

resource-selection circular descending

busy-out monitor track test-track

connect isdn-group 1

modem-passthrough

Anonymous
Not applicable

Re: Adtran 908e SIP to PRI

You can find more info here:

https://supportforums.adtran.com/docs/DOC-3409