cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

1335 POE - all lights solid - boot hangs

Jump to solution

Upon powering up a 1335 POE, all LED's cycle one time, then all green/red LED's remain on solid.  Post does not complete.

Tried to access via console cable but cannot obtain a sign in prompt.  Garbage characters across the screen, so I suspect an issue with the boot code or corrupt boot file.

Is this a repairable issue in the field, or does the boot ROM or flash need to be replaced at the manufacture?

Thanks,

John

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: 1335 POE - all lights solid - boot hangs

Jump to solution

John,

You may be able to attempt to repair the NetVanta 1335 if you are able to get into bootstrap. Please try the method below:

- While the NetVanta 1335 is booted up, establish a console connection through the serial console port on the back of the 1335.

- With the console connection still active, power cycle the NetVanta 1335.

- While the NetVanta 1335 attempts to boot, hit escape continuously until you see the "bootstrap#" prompt

If you are able to get into bootstrap, then you can attempt to erase the flash filesystem and then to upload a new firmware image. The command to erase the filesystem is "erase file-system". If you are unable get into bootstrap, then there is not much that can be done onsite and the NetVanta 1335 will need to be sent in for a repair and return RMA.

You can submit an RMA request at this link: http://www.adtran.com/web/page/portal/Adtran/wp_support_rma

Let me know if you have any questions regarding your issue.

Thanks,

Noor

View solution in original post

4 Replies
Anonymous
Not applicable

Re: 1335 POE - all lights solid - boot hangs

Jump to solution

John,

You may be able to attempt to repair the NetVanta 1335 if you are able to get into bootstrap. Please try the method below:

- While the NetVanta 1335 is booted up, establish a console connection through the serial console port on the back of the 1335.

- With the console connection still active, power cycle the NetVanta 1335.

- While the NetVanta 1335 attempts to boot, hit escape continuously until you see the "bootstrap#" prompt

If you are able to get into bootstrap, then you can attempt to erase the flash filesystem and then to upload a new firmware image. The command to erase the filesystem is "erase file-system". If you are unable get into bootstrap, then there is not much that can be done onsite and the NetVanta 1335 will need to be sent in for a repair and return RMA.

You can submit an RMA request at this link: http://www.adtran.com/web/page/portal/Adtran/wp_support_rma

Let me know if you have any questions regarding your issue.

Thanks,

Noor

Anonymous
Not applicable

1335 POE - all lights solid - boot hangs

Jump to solution

Noor,

Unfortunately using the esc key method was not able to connect either.  Looks like I'll have to RMA the unit in this case.

Thanks for your response.  I certainly appreciate it.

John

Anonymous
Not applicable

Re: 1335 POE - all lights solid - boot hangs

Jump to solution

John,


I marked the question as "assumed answered" because there were no more follow up questions.

Please, do not hesitate to add additional information to this post if necessary.

Thanks,

Noor

Anonymous
Not applicable

Re: 1335 POE - all lights solid - boot hangs

Jump to solution

John:

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Levi