cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
stevenm
New Contributor

Factory Reset without using CLI?

Jump to solution

How can I factory reset an Adtran Netvanta 1234 without using CLI?  Also, I am not able to get to the technical document as it states I don't have permission to do so.

Labels (1)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Factory Reset without using CLI?

Jump to solution

stevenm‌:

I went ahead and flagged "Assumed Answered" on this post to make it more visible and help other members of the community find solutions more easily. If you feel like there is a better answer, feel free to come back to this post and select it with the applicable buttons.  If you have any additional information on this that others may benefit from, please come back to this post to provide an update.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Levi

View solution in original post

0 Kudos
6 Replies
Anonymous
Not applicable

Re: Factory Reset without using CLI?

Jump to solution

Hi stevenm:

You may obtain a default configuration file here:  NetVanta 123x (1st Generation) Default Configuration

Extract the file and browse to the Configuration page in the web GUI.  Upload the CFG file and reboot.

Best,

Chris

Anonymous
Not applicable

Re: Factory Reset without using CLI?

Jump to solution

COMMUNITY ADMINISTRATORS:

It appears that the page Restoring an AOS Device to Factory Default‌ appears to be restricted from view, as stevenm noticed.

Chris

Anonymous
Not applicable

Re: Factory Reset without using CLI?

Jump to solution

I think there's a broken link on the 123x default config page.  Please check out Restoring an AOS Device to Factory Default for assistance.

Chris

stevenm
New Contributor

Re: Factory Reset without using CLI?

Jump to solution

Thanks for the quick response.  Sorry, that I wasn't clear.  My problem is that I don't know what the IP address of the switch currently is set to.  So is there any other way to reset it when you don't know the address?

Thanks,
Steve

Anonymous
Not applicable

Re: Factory Reset without using CLI?

Jump to solution

Perhaps the IP was never changed from default:  10.10.10.1.  You could change your PC's IP address to 10.10.10.2 and try to manage the switch that way.  Otherwise, connecting with a console cable is by far the simplest option.  It is CLI, but the commands aren't difficult for determining the IP:

  1. Logon if necessary with username and password
  2. Type show interface vlan and press Enter


Will that work for you?


Chris


Anonymous
Not applicable

Re: Factory Reset without using CLI?

Jump to solution

stevenm‌:

I went ahead and flagged "Assumed Answered" on this post to make it more visible and help other members of the community find solutions more easily. If you feel like there is a better answer, feel free to come back to this post and select it with the applicable buttons.  If you have any additional information on this that others may benefit from, please come back to this post to provide an update.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Levi

0 Kudos