cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

Can you reboot the Netvanta 160 remotely?

Jump to solution

As of today, we note that sometimes when the AP reboots, presumably due to intermittent interference, the reboot is not clean.  Specifically people cannot connect to the AP yet INSSIDER shows the AP channel is on, the SSID is broadcast, there is a ping response to the AP's IP address, and the Access Controller (NV 1531P in our case) shows all is normal.  We have the latest firmware, issued in late April, on the NV 160 and their Access Controllers.

A reboot resolved this but it had to be done on site. I do not know if there is a way to remotely reboot the NV160 as this would have been helpful.

Tags (3)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Can you reboot the Netvanta 160 remotely?

Jump to solution

gtb,

If you have remote access to the PoE switch I recommend that you shut down (or disable in the GUI) the switch port which is connected to the AP you want to reboot.  Wait a minute or so and do a "no shut" in the CLI or enable it in the GUI.  This will reboot the AP.

Dan

View solution in original post

0 Kudos
2 Replies
Anonymous
Not applicable

Re: Can you reboot the Netvanta 160 remotely?

Jump to solution

gtb,

If you have remote access to the PoE switch I recommend that you shut down (or disable in the GUI) the switch port which is connected to the AP you want to reboot.  Wait a minute or so and do a "no shut" in the CLI or enable it in the GUI.  This will reboot the AP.

Dan

0 Kudos
Anonymous
Not applicable

Re: Can you reboot the Netvanta 160 remotely?

Jump to solution

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post to unmark it and select another in its place with the applicable buttons.  If you have any additional information on this that others may benefit from, please come back to this post to provide an update.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Noor