cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jlanning
New Contributor II

PRI Delay

Jump to solution

First let me thanks for any help I can get here.  I have a 908e and am very new with the Adtran brand.  What I am trying to accomplish is receiving a SIP connection from my carrier and then pass off a PRI to my Asterisk server (going to be a shortel system eventually).  I have things working kind of but I get a 2 second or so delay when dialing in, and all audio is delayed for 2 seconds at least.

Here is my config. any help would be greatly appreciated.

interface t1 0/1

  fdl none

  tdm-group 1 timeslots 1,24 speed 64

  no shutdown

interface pri 1

  description pri 1

  connect t1 0/1 tdm-group 1

  no shutdown

isdn-group 1

  connect pri 1

no tftp server

no tftp server overwrite

http server

http secure-server

no snmp agent

no ip ftp server

no ip scp server

no ip sntp server

sip

sip udp 5060

no sip tcp

voice feature-mode network

voice forward-mode network

voice dial-plan 2 local NXX-NXX-XXXX

voice trunk T01 type sip

  description "Carrier 1"

  sip-server primary x.x.x.x

  max-number-calls 24

voice trunk T02 type isdn

  description "PRI"

  resource-selection circular descending

  connect isdn-group 1

  rtp delay-mode adaptive

voice trunk T03 type sip

  description "Carrier 2"

  sip-server primary x.x.x.x

voice trunk T04 type sip

  description "Carrier 3"

  sip-server primary x.x.x.x

voice grouped-trunk TRUNK

  trunk T01

  accept $ cost 0

voice grouped-trunk TRUNKPRI

  trunk T02

  accept $ cost 0

Labels (3)
0 Kudos
1 Solution

Accepted Solutions
jlanning
New Contributor II

Re: PRI Delay

Jump to solution

After having issues with getting a license error after upgrading the firmware so I called support.  They found that the Adtran was trying to send calls from one SIP trunk to another SIP trunk and that was causing the delay.  to do this we had to add a permit and deny to each trunk group.

Thanks for your help.

View solution in original post

0 Kudos
3 Replies
jayh
Honored Contributor
Honored Contributor

Re: PRI Delay

Jump to solution

Try adding the following two commands to the PRI interface:

interface pri 1

  isdn name-delivery setup

  calling-party name-facility-timeout 1


This kind of delay on a PRI connection is often due to the Adtran device waiting on CNAM from the PBX that is never sent. The above should greatly reduce or eliminate it.

jlanning
New Contributor II

Re: PRI Delay

Jump to solution

My device doesn't have the calling-party name-facility-timeout command in it.  Here is the Adtran version I am running.

TA908e#show version

ADTRAN, Inc. OS version R11.10.1.E

  Mainline Version: ENM.15.156

  P4 Changelist: 234321

  Checksum: f3e5fce24e832d633530f06d03366b3ad08cdbef92bd6090d4430cbb1a3e71ef

  Built on: Tue Jan 26 17:46:49 CST 2016

Hardware version R.1.5.0.0-0

Boot ROM version R10.9.3.B2

  Built on: Mon Jul  6 16:47:40 CDT 2015

  Compatibility Version: 1

Copyright (c) 1999-2016, ADTRAN, Inc.

Platform: Total Access 908e (3rd Gen), part number

Serial number

Flash: 97120256 bytes  DRAM: 509648896 bytes

TA908e uptime is 0 days, 0 hours, 4 minutes, 6 seconds

slot 0, DSP 1

  DSP software version: G3.R1.3..0-R

  DSP hardware version: Freescale BSC9131

  Total channels: 60

System returned to ROM by Soft Reset

Current system image file is "T900E3A-R11-10-1-E.biz"

Boot system image file is "T900E3A-R11-10-1-E.biz"

Primary system configuration file is "startup-config"

jlanning
New Contributor II

Re: PRI Delay

Jump to solution

After having issues with getting a license error after upgrading the firmware so I called support.  They found that the Adtran was trying to send calls from one SIP trunk to another SIP trunk and that was causing the delay.  to do this we had to add a permit and deny to each trunk group.

Thanks for your help.

0 Kudos