cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

Dial Plan IP 706

Jump to solution

Good Evening guys,

How you doing!?, I'm working with an IP Phone 706 and I have issues with the DIal Plan which is showed below:

DialPlanPbx 0|2XXX|904[4-5]xxxxxx-xxxx|9xxxx-xxxx|901800xxx-xxxx|901xxxxx-xxxxx

DialPlanExternal 0+T3|*[2-9]xx[2-9]xxxx|2XXX|904[4-5]xxxxxx-xxxx|9xxxx-xxxx|901800xxx-xxxx|901XXXXXXXXXX

For that dial plan, I don't know what's happened but when I try to call to some numbers the phone cuts some numbers so not all the digits are sent, for example based on my dial plan If I want to call to a cell phone, which has the format 04455XXXX-XXXX, if I dial:

90445511111111, I assume that will match the template 904[4-5]xxxxxx-xxxx, the phone only sends out 0445511111 and the call failed.

Same happens with the 901800XXX-XXXX template, the phone misses the last 3 digits.

If you have any suggestions on this, I will appreciate it a lot.

PS. I'm sharing with you a config file.

Thanks in advance,

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Dial Plan IP 706

Jump to solution

dcorrea,

There are likely two changes you are going to have to make.

1 – The IP 700 series dial plan does not support dashes to separate out wildcards (ex: xxx-xxxx). You will need to remove them for the dial plan to work correctly on the phone.

2 – The entry for 9xxxxxxxx is going to conflict with the one for 904[4-5]xxxxxxxxxx.  One solution is to add +T3 on the end of the less specific entry.  This will allow you to dial both, but you will have to hit the dial softkey twice, wait for the 3 second timeout, or add an extra # on the end when you dial numbers matching the dial plan entry with the +T3.

Here is an example of what you could load in your phone to take care of both problems listed above:


DialPlanPbx 0|2xxx|904[4-5]xxxxxxxxxx|9xxxxxxxx+T3|901800xxxxxxx|901xxxxxxxxxx


DialPlanExternal 0+T3|*[2-9]xx[2-9]xxxx|2XXX|904[4-5]xxxxxxxxxx|9xxxxxxxx+T3|901800xxxxxxx|901xxxxxxxxxxx


I hope this helps.

Thanks,
Matt

View solution in original post

0 Kudos
2 Replies
Anonymous
Not applicable

Re: Dial Plan IP 706

Jump to solution

dcorrea,

There are likely two changes you are going to have to make.

1 – The IP 700 series dial plan does not support dashes to separate out wildcards (ex: xxx-xxxx). You will need to remove them for the dial plan to work correctly on the phone.

2 – The entry for 9xxxxxxxx is going to conflict with the one for 904[4-5]xxxxxxxxxx.  One solution is to add +T3 on the end of the less specific entry.  This will allow you to dial both, but you will have to hit the dial softkey twice, wait for the 3 second timeout, or add an extra # on the end when you dial numbers matching the dial plan entry with the +T3.

Here is an example of what you could load in your phone to take care of both problems listed above:


DialPlanPbx 0|2xxx|904[4-5]xxxxxxxxxx|9xxxxxxxx+T3|901800xxxxxxx|901xxxxxxxxxx


DialPlanExternal 0+T3|*[2-9]xx[2-9]xxxx|2XXX|904[4-5]xxxxxxxxxx|9xxxxxxxx+T3|901800xxxxxxx|901xxxxxxxxxxx


I hope this helps.

Thanks,
Matt

0 Kudos
Anonymous
Not applicable

Re: Dial Plan IP 706

Jump to solution

Dear Matt,

Thanks a lot for the help, I did the changes that you suggested and now everything is working properly!

We keep in touch