cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
rcsteve
New Contributor

Trunk Port or Access Port?

I am using vWLAN with 1840's in one building and 1925's in another.  I am trying to get a feel of the preferred method on configuring the switch port where the access point plugs into.  Currently my ports are access ports, but in talking to a vendor that is doing a wireless study for us, he said this would cause all traffic to go back through and out the vWLAN controller.  During light traffic times this does not seem like it would be a problem.  But during heavy traffic times it seems like this would cause a bottle neck.  He was asking me if the BSAPs are lightweight access points, but he thought they would not be if the data was funneling through the controller.

Any clarification would be appreciated it.

Thanks,

   Steve

0 Kudos
1 Reply
Anonymous
Not applicable

Re: Trunk Port or Access Port?

the basp's are fat aps, being controller-less they only communicate with the vwlan for config and management purposes, the aps can be trunked or access ports, whatever works best for you.

take a look at BlueSocket vWLAN Commonly Asked Questions Page