cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
sharpy
New Contributor

How to get TA-908e to respond to OPTIONS request

Hello,

We have a TA-908e successfully registered to a Genband SBC.

The Genband sends an OPTIONS packet as a Qualify (keep-alive).

We need the TA to respond with a 200/OK. Right now it is not responding with anything.

Is there a configuration we could perform to make it respond?

Thanks

Genband OPTIONS request:

20:47:04.569 SIP.MSG OPTIONS REQ RX ta-908e ta-908e

OPTIONS sip:ta-908e@172.16.1.2:5060 SIP/2.0

From: "ta-908e"<sip:ta-908e@10.0.0.2>;tag=3716916426-586458

To: "ta-908e"<sip:ta-908e@10.0.0.2:5060>

Call-ID: 761339-3716916426-586447@mysbc@mydomain.net

CSeq: 1 OPTIONS

Max-Forwards: 19

Allow: PUBLISH,MESSAGE,UPDATE,SUBSCRIBE,REFER,INFO,NOTIFY,REGISTER,OPTIONS,BYE,INVITE,ACK,CANCEL

Via: SIP/2.0/UDP 10.0.0.2:5060;branch=z9hG4bKe38d01a50d8a4fefc024e45252d92d61

Contact: <sip:ta-908e@10.0.0.2:5060>

Content-Length: 0

Labels (1)
0 Kudos
2 Replies
jayh
Honored Contributor
Honored Contributor

Re: How to get TA-908e to respond to OPTIONS request

On the voice trunk connected to the Genband, configure:

sip-keep-alive options

You can also set a value in seconds that the Adtran will use to poll the other side.

sip-keep-alive options 60

will poll the other side every minute.

sharpy
New Contributor

Re: How to get TA-908e to respond to OPTIONS request

Unfortunately this answer did not work. What it does is SEND Options keep-alives. It does not respond to the unsolicited RECEIVED Options keep-alives from the SBC.