cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

Enable Password

Jump to solution

How do I chnage the "enable password" from the CLI ? I need to do it on 3205 and 3305.

Thanks

Tags (3)
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Enable Password

Jump to solution

Log into the unit normally, then type configure terminal to get to the config prompt.  Then type enable password yourpassword and hit enter.

View solution in original post

0 Kudos
3 Replies
Anonymous
Not applicable

Re: Enable Password

Jump to solution

Log into the unit normally, then type configure terminal to get to the config prompt.  Then type enable password yourpassword and hit enter.

0 Kudos
Anonymous
Not applicable

Re: Enable Password

Jump to solution

:

I went ahead and flagged this post as “Assumed Answered.”  If any of the responses on this thread assisted you, please mark them as either Correct or Helpful answers with the applicable buttons.  This will make them visible and help other members of the community find solutions more easily.  If you still need assistance, I would be more than happy to continue working with you on this - just let me know in a reply.

Levi

Anonymous
Not applicable

Re: Enable Password

Jump to solution

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Noor