cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

Local or Network modes on SIP Trunk

Jump to solution

On a SIP Trunk (using a NV3140) what is the recommendation for setting the transfer, forward, and feature modes?  Local or Network?

Should this be set globally or within each SIP Trunk (one trunk faces the provider and the other faces the PBX)?

0 Kudos
1 Solution

Accepted Solutions
jayh
Honored Contributor
Honored Contributor

Re: Local or Network modes on SIP Trunk

Jump to solution

It's a global setting, not per-trunk, and it depends on a number of factors.

If the PBX handles those features, let the PBX do it. The settings really won't make any difference as they'll never be sent towards the 3140 or provider but I'd set to network so the 3140 doesn't attempt to do so.

If the PBX doesn't handle them and the SIP trunking carrier offers those features, then set to network.

If neither the SIP provider nor the PBX supports them and you want to offer them then set to local and the 3140 will do so. You may need to also tweak the SPRE codes in order to make it work the way you want. This is the least desirable as some things like forwarding state may not always survive a reboot.

View solution in original post

0 Kudos
3 Replies
jayh
Honored Contributor
Honored Contributor

Re: Local or Network modes on SIP Trunk

Jump to solution

It's a global setting, not per-trunk, and it depends on a number of factors.

If the PBX handles those features, let the PBX do it. The settings really won't make any difference as they'll never be sent towards the 3140 or provider but I'd set to network so the 3140 doesn't attempt to do so.

If the PBX doesn't handle them and the SIP trunking carrier offers those features, then set to network.

If neither the SIP provider nor the PBX supports them and you want to offer them then set to local and the 3140 will do so. You may need to also tweak the SPRE codes in order to make it work the way you want. This is the least desirable as some things like forwarding state may not always survive a reboot.

0 Kudos
Anonymous
Not applicable

Re: Local or Network modes on SIP Trunk

Jump to solution

Thank you.

I will set them as network and go from there.

One other question.  The provider says that the PBX must be able to reply to SIP Options requests.  I am registering the SIP Trunk to the 3140, and letting it handle the authentication/registration.  So do I have to set the 3140 to be able to respond or is this still a responsibility of the PBX?

jayh
Honored Contributor
Honored Contributor

Re: Local or Network modes on SIP Trunk

Jump to solution

The 3140 can handle SIP options, and most SIP-capable PBXes as well. Shouldn't be an issue.