cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
chad44
New Contributor

how do i rest to factory settings

in the middle of setting up power went out and i cant get back in to the adtran at all

0 Kudos
3 Replies
Anonymous
Not applicable

Re: how do i rest to factory settings

The only way to do that is to use the console cable and bypass the password requirement.  Here's a link to the Adtran video and document to do that:

[video] - Password Recovery in AOS

John Wable

chad44
New Contributor

Re: how do i rest to factory settings

i can get on boot strap but how can i reset back to factory settings so i can start over.

Anonymous
Not applicable

Re: how do i rest to factory settings

You can either erase the startup-config or download the factory configuration and copy that to overwrite the current configuration.

You can look at this guide: Restoring an AOS Device to Factory Default

Hope this helps,

Patrick