cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

One-way Audio on Call Transfers

Jump to solution

I'm running AOS A5.02.00.E on a NV7100 and using Polycom 550's. When I try to transfer an incoming call to another extension, the transfer completes, but the caller who originated the original call can not hear any audio. There is audio going from the the call originator to the transfered extension however. Any ideas on how to fix this?

Thanks,

Brian

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: One-way Audio on Call Transfers

Jump to solution

Thanks for jumping in with suggestions and !  This is exactly what we want to see in the community!  Please keep it up.

Brian – I saw that you ended up opening a ticket for this and the result was that a Quintum gateway was changing the codec being used in the middle of the call.  You were going to pursue forcing the G711 codec on the SIP trunk.  Here are the configuration instructions that were supplied:


Configure a G711 only codec-list:


NV7100#config t


NV7100(config)#voice codec-list g711_only


NV7100(config-codec)#codec g711ulaw



After that, you will need to assign that codec list to the SIP trunk:


NV7100(config)#voice trunk t01


NV7100(config-T01)#codec-group g711_only


I went ahead and marked this post as “Assumed Answered”.  If any of the responses on this thread assisted you, please mark them as either Correct or Helpful answers with the applicable buttons.  This will make them visible to help other members of the community find solutions more easily, as well as award points to the people that supplied helpful information. 

Thanks,

Matt

View solution in original post

0 Kudos
10 Replies

Re: One-way Audio on Call Transfers

Jump to solution

Have you tried creating a Loop interface?

1) Create interface Loop 1

2) Assigning an IP address to it

3) Make the media gateway primary Loop 1 on Vlan 1 and 2

I've used this before to resolve one-way audio issues.

Anonymous
Not applicable

Re: One-way Audio on Call Transfers

Jump to solution

What kind of lines are you / they using?

Anonymous
Not applicable

Re: One-way Audio on Call Transfers

Jump to solution

I'm not sure I understand your question. The Polycom phones are sip extensions.

Anonymous
Not applicable

Re: One-way Audio on Call Transfers

Jump to solution

Are they SIP trunks, a T-1 or copper lines (and if they're copper, are they SLA"s)?

Anonymous
Not applicable

Re: One-way Audio on Call Transfers

Jump to solution

Sip trunks.

Anonymous
Not applicable

Re: One-way Audio on Call Transfers

Jump to solution

Thanks for jumping in with suggestions and !  This is exactly what we want to see in the community!  Please keep it up.

Brian – I saw that you ended up opening a ticket for this and the result was that a Quintum gateway was changing the codec being used in the middle of the call.  You were going to pursue forcing the G711 codec on the SIP trunk.  Here are the configuration instructions that were supplied:


Configure a G711 only codec-list:


NV7100#config t


NV7100(config)#voice codec-list g711_only


NV7100(config-codec)#codec g711ulaw



After that, you will need to assign that codec list to the SIP trunk:


NV7100(config)#voice trunk t01


NV7100(config-T01)#codec-group g711_only


I went ahead and marked this post as “Assumed Answered”.  If any of the responses on this thread assisted you, please mark them as either Correct or Helpful answers with the applicable buttons.  This will make them visible to help other members of the community find solutions more easily, as well as award points to the people that supplied helpful information. 

Thanks,

Matt

0 Kudos
Anonymous
Not applicable

Re: One-way Audio on Call Transfers

Jump to solution

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Matt

gregstahl
New Contributor III

Re: One-way Audio on Call Transfers

Jump to solution

Matt,

Do you know if the unit needs to be restarted after the codec lists are assigned to the trunk?  We're having the same issue and I added the list and assigned them to the trunk, made a test call and still had one-way audio.  I have to wait until the end of the day to restart the unit.

Thanks,

Greg

Anonymous
Not applicable

Re: One-way Audio on Call Transfers

Jump to solution

Greg,

The changes are live.  You may be having a separate issue if that did not resolve the problem. Depending on what is really going on sometimes a blind transfer will work instead of an assisted transfer. That would be an interesting data point to know.  Also, make sure your IP phones are running the minimum required version of firmware that corresponds to the release notes for the version of chassis firmware being used on the NetVanta 7100.  There is a dedicated section in the release notes that detail this information. Problems like this usually require getting a debug voice verbose, debug sip stack messages, and a debug isdn l2-formatted (if using a PRI) all enabled at the same time while the issue is recreated to track down the problem unless you can have the provider debug a call from their side to identify the issue.  If the provider is unable to help and you can collect the debugs and the current configuration and upload them to the FTP server from the instructions below, I would be happy to take a look.


Open Internet Explorer web browser on their PC
Type the following URL:  ftp://ftp.adtran.com


Press the Alt key, click View, and then click Open FTP Site in Windows Explorer


Double-click the "Incoming" folder
Drag and drop files from PC into the Internet Explorer window


Reply to this post with the exact filenames used so we can retrieve the files


Thanks,

Matt

gregstahl
New Contributor III

Re: One-way Audio on Call Transfers

Jump to solution

Thanks Matt, this is actually on a TA912 (SIP to PRI).  I'm doing a stare and compare with a working config that we have at another site and found the codec list were in the config, just not assigned to the trunks.  I also found on the PRI Interface "role network b-channel-restarts disable" on the problem TA912 and not on the working TA912.  I tried removing it with no, but got command unrecognized.  The AOS is A4.11.00.  Do you know if the "role" command would have an impact on one way audio?

I'm going to run some debug Monday.

Thanks for your help.

Greg