cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

BCS outbound fax

Jump to solution


trying to get outbound fax to work any ideas?

inbound is fine.

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: BCS outbound fax

Jump to solution

I got it working.

Mark from Adtran contacted me, he pointed out that I had two Adtran 7000's on the BCS and I needed to set the priority lower on the 7100 that I wanted to send the fax to.  After that the BCS sent sip calls to the 7100 that I had the debug running on.

View solution in original post

0 Kudos
5 Replies
Anonymous
Not applicable

Re: BCS outbound fax

Jump to solution

At what point is it failing?

Are you using SIP trunks to send the fax to the PSTN?

Anonymous
Not applicable

Re: BCS outbound fax

Jump to solution

sip trunk to the 7100.  debuging 7100 I see nothing coming from the BCS.  on the BCS I see it attempting in the fax que but it fails.

Anonymous
Not applicable

Re: BCS outbound fax

Jump to solution

Brian,

I would start with a PCAP from the UC server to see if there is an INVITE destined to the correct IP address for the NetVanta 7100.  The software log (c:\ADTRANLogs\) would be also be a good thing to look at by searching for the number you are trying to send a fax to.  A dialing restriction could potentially cause something like this.

Thanks,
Matt

Anonymous
Not applicable

Re: BCS outbound fax

Jump to solution

I got it working.

Mark from Adtran contacted me, he pointed out that I had two Adtran 7000's on the BCS and I needed to set the priority lower on the 7100 that I wanted to send the fax to.  After that the BCS sent sip calls to the 7100 that I had the debug running on.

0 Kudos
Anonymous
Not applicable

Re: BCS outbound fax

Jump to solution

That Mark guy must be pretty good! Actually Adam Ackerman gets credit for this!

Glad it is working now!