cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

0x20 error message

Jump to solution


Getting a 0x20 error message when trying to boot a NEW Polycom 650 phone to the 7100.

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: 0x20 error message

Jump to solution

Hello merbac,

It sounds like you have the wrong firmware loaded in the phone.

You can find the firmware files here:

https://www.adtran.com/web/appmanager/portal/Adtran?_nfpb=true&_pageLabel=waverunner_page_support_so...

Make sure to read the release notes to make sure the Polycom firmware is compatible with 7100's firmware.

View solution in original post

2 Replies
Anonymous
Not applicable

Re: 0x20 error message

Jump to solution

Hello merbac,

It sounds like you have the wrong firmware loaded in the phone.

You can find the firmware files here:

https://www.adtran.com/web/appmanager/portal/Adtran?_nfpb=true&_pageLabel=waverunner_page_support_so...

Make sure to read the release notes to make sure the Polycom firmware is compatible with 7100's firmware.

Anonymous
Not applicable

Re: 0x20 error message

Jump to solution

I actually did, but it looks like one or some of the files didn't transfer when using the FTP this morning. I resent the files over, phones came up.

THANK YOU FOR THE QUICK RESPONSE!:)