cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jon
New Contributor

Can we bond 2 Adtran 850 with T1's to aquire bandwidth of 3 Mbps?

Thanks in Advanced.

  What i would like to know is, is  it possible to bond 2 Adtran 850 with a T1 connection on each to get a max of 3 Mbps.
I have a Cisco 2600 with 2 T1 Controllers serving a branch. The site was using one adtran for data and the other for voice.
I want to bond the 2 adtrans for data only since we no longer need the voice. How can this be done with Two Adtran 850's ?

Thanks,

  -Jon

Labels (2)
0 Kudos
2 Replies
Anonymous
Not applicable

Re: Can we bond 2 Adtran 850 with T1's to aquire bandwidth of 3 Mbps?

Multilink has to be done in a single device that bonds all the T1's involved on each side of the connection.  It can't be done to two devices that each have a single T1.  You'll need some device on the other side that can handle two T1s and do multilink.

Anonymous
Not applicable

Re: Can we bond 2 Adtran 850 with T1's to aquire bandwidth of 3 Mbps?

I went ahead and flagged this post as "Assumed Answered".  If any of the responses on this thread assisted you, please mark them as Correct or Helpful as the case may be with the applicable buttons.  This will make them visible and help other members of the community find solutions more easily.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,
Matt