cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

"Selective" port mirror possible?

Jump to solution

We're installing a NetVanta 1638P today for use in a VoIP environment.  A call recording server will be connected, and port mirroring will be used so the server can see voice traffic.  Is there any way to mirror only SIP and RTP, rather than all traffic from monitor session sources?

I couldn't find anything like this in the port mirroring guide.  Thanks in advance!

CJ

Labels (1)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: "Selective" port mirror possible?

Jump to solution

and - There really is no way for the Adtran to filter which packets are captured using port mirroring except if it should only capture transmit and/or receive traffic. As unified mentioned, the packets are usually filtered by the packet capturing application (i.e. Wireshark). However, these filter options are not configurable on the Adtran itself.

Thanks,

Noor

View solution in original post

0 Kudos
5 Replies
Anonymous
Not applicable

Re: "Selective" port mirror possible?

Jump to solution

I don't believe Adtran products can't do this. (Please correct me if I am wrong)

I needed this and went with a product from Gigamon. Gigamon | Network Visibility | Traffic Visibility Networking | Network Traffic

Anonymous
Not applicable

Re: "Selective" port mirror possible?

Jump to solution

and - There really is no way for the Adtran to filter which packets are captured using port mirroring except if it should only capture transmit and/or receive traffic. As unified mentioned, the packets are usually filtered by the packet capturing application (i.e. Wireshark). However, these filter options are not configurable on the Adtran itself.

Thanks,

Noor

0 Kudos
Anonymous
Not applicable

Re: "Selective" port mirror possible?

Jump to solution

  -

I went ahead and flagged this post as “Assumed Answered.”  If any of the responses on this thread assisted you, please mark them as either Correct or Helpful answers with the applicable buttons.  This will make them visible and help other members of the community find solutions more easily.  If you still need assistance, I would be more than happy to continue working with you on this - just let me know in a reply.

Noor

Anonymous
Not applicable

Re: "Selective" port mirror possible?

Jump to solution

Whoops—thanks for changing that status, Noor, and for your help!

Anonymous
Not applicable

Re: "Selective" port mirror possible?

Jump to solution

:

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Levi