cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
nscott
New Contributor

Polycom SoundPoint IP 650 Time Out

Have a 7100 that is updated to the newest version of code along with the firmware for both the Adtran's and one Polycom SoundPoint IP 650. The problem is the Polycom 650 seems to go into a sleep mode after x amount of time and the time stops updating. Is there a way to either resolve this or just change the time it takes before it go into sleep mode. I would believe this is an option under global configurations, but I don't know the syntax for it.

Thank you,

--Nate

0 Kudos
6 Replies
Anonymous
Not applicable

Re: Polycom SoundPoint IP 650 Time Out

Nate,

Thanks for posting this to the Support Community.  To clarify, does the phone operate correctly where it can make and receive calls, but it just displays the wrong time, or is the phone frozen and you have to reboot to revive it?

If it operates correctly and the time is the problem this post explains how to resolve that portion:

Thanks,
Matt

nscott
New Contributor

Re: Polycom SoundPoint IP 650 Time Out

The phone is able to make and receive phone calls. It doesn’t show the time out option under menu for the back light.  When the back light goes into ide the time stops refreshing on the screen.  It’s an oddity that the user seems to not be able to live with.

Thank you,

--Nate

Anonymous
Not applicable

Re: Polycom SoundPoint IP 650 Time Out

Nate,

Is this the only Polycom phone on this system?  If not, do others also have this problem? 

I would suggest defaulting this phone.  You will need to remove and reapply power, then hold down *,4,6,8 immediately while it boots up until it prompts you for a password, and then enter 456.  If that does not resolve the issue I would suggest rebuilding the user and phone configuration from scratch.  Make sure to document the current voice user configuration, button map configuration, or anything unique about this phone so you can rebuild it properly.  Then power off the phone, delete the phone configuration from Voice > IP Phone Configs , then separately delete the user from Voice > User Accounts.  To recreate the user click New while you are on Voice > User Accounts, enter the extension and name, select New Address, pick the phone model, enter the MAC address, and click Apply.  On the resulting screen click the Generate random password button if it is present (depends on firmware), then go to the Voicemail tab, select the Class of Service, and click the Apply button.  If there were any other custom settings for this user you will need to reapply them as well.  Finally power the phone back on and default it by holding down *,4,6,8 immediately while it boots up until it prompts you for a password, and then enter 456.  After the phone boots up and registers see if the issue is still present.

Thanks,

Matt

nscott
New Contributor

Re: Polycom SoundPoint IP 650 Time Out

Thank you Matt,

I will stop by the prem on Monday and try this.

--Nate

Anonymous
Not applicable

Re: Polycom SoundPoint IP 650 Time Out

Nate,

Were you able to resolve this issue from the instructions in my last post?  If so please come back to this thread and let us know by marking a Correct or Helpful answer, or if you still need assistance we would be happy to continue working with you on this.

Thanks,
Matt

Anonymous
Not applicable

Re: Polycom SoundPoint IP 650 Time Out

I went ahead and flagged this post as "Assumed Answered". If any of the responses on this thread assisted you, please mark them as Correct or Helpful as the case may be with the applicable buttons. This will make them visible and help other members of the community find solutions more easily. If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Matt