cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
thomk
New Contributor

3448 Port Forwarding via GUI

Jump to solution


how do I configure port forwarding via the GUI without running the firewall configuration wizard over again?

Labels (1)
Tags (3)
0 Kudos
1 Solution

Accepted Solutions
dogma
New Contributor II

Re: 3448 Port Forwarding via GUI

Jump to solution

I'm sure someone can explain it in more detail than I can, but maybe this will help.

For a new Port Forward:

Data > Security Zones > Public > Add Policy > Policy Type > Port Forward

To edit an existing one:

Data > Security Zones > Public > Select the policy from the list

View solution in original post

0 Kudos
2 Replies
dogma
New Contributor II

Re: 3448 Port Forwarding via GUI

Jump to solution

I'm sure someone can explain it in more detail than I can, but maybe this will help.

For a new Port Forward:

Data > Security Zones > Public > Add Policy > Policy Type > Port Forward

To edit an existing one:

Data > Security Zones > Public > Select the policy from the list

0 Kudos
Anonymous
Not applicable

Re: 3448 Port Forwarding via GUI

Jump to solution

:

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Levi