cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
mhess
New Contributor

What is the status of 1st Gen TA900?

Jump to solution

Are 1st Gen TA900 models still supported?

Are 1st Gen TA900 models still sold?

If still supported, has an "end of life" date been set?

Thanks,

Matthew

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: What is the status of 1st Gen TA900?

Jump to solution

Mathew,

Thanks for posting.  While the first generation Total Access units are no longer manufactured since being replaced by second generation units, Adtran will still offer technical support until the warranty expires.  All Total Access 900 series units come with a ten year warranty!

Thanks!

David

View solution in original post

0 Kudos
3 Replies
Anonymous
Not applicable

Re: What is the status of 1st Gen TA900?

Jump to solution

They are discontinued:

https://www.adtran.com/web/page/portal/Adtran/product/4210904L1

The last software release was 01/23/2012

Here is the differences between the first and second gen:

http://voip4ea.com/2012/02/21/differences-between-the-first-and-second-generation-adtran-total-access-900-series-gateways/

Anonymous
Not applicable

Re: What is the status of 1st Gen TA900?

Jump to solution

Mathew,

Thanks for posting.  While the first generation Total Access units are no longer manufactured since being replaced by second generation units, Adtran will still offer technical support until the warranty expires.  All Total Access 900 series units come with a ten year warranty!

Thanks!

David

0 Kudos
Anonymous
Not applicable

Re: What is the status of 1st Gen TA900?

Jump to solution

Mathew,

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

David