cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
snarffnet
New Contributor

3120 firmware upgrade no login afterward

Can you tell me what i'm doing wrong? I get into "bootstrap" using this method but have a very limited set of commands, when I enter "bypass passwords" and then "boot" the unit boots up the production config and the IP address of the switch port is set to the prodution config address. When I telnet to the production config router ip address I can't get in. What am I doing wrong? Forgive me if this is a simple question I'm a noob with Adtrans.

Model 3120

No serial port.

Thank You in Advance

0 Kudos
5 Replies
Anonymous
Not applicable

Re: 3120 firmware upgrade no login afterward

- Thanks for posting your question on the forum! I've branched your question to a new thread as it pertains to a NetVanta 3120, and as you mentioned, it does not have a serial port.

Please correct me if I am understanding incorrectly. It sounds like your 3120 is booting up correctly, however, you are unable to log into the 3120 without bypassing the passwords. It would be helpful if we could take a look at the configuration of your 3120. (Please remember to remove any sensitive information). Also, which port are you plugging into when attempting to log in to the 3120?

Please do not hesitate to let us know if you have any questions.

Thanks,

Noor

Re: 3120 firmware upgrade no login afterward

Thanks Noor for the reply

I plug into the # 2 and 4 switch ports. Below is a copy of my config.

! ADTRAN OS version 17.01.02.00.E

! Boot ROM version 14.04.00

! Platform: NetVanta 3120, part number 1700600L2

! Serial number LBADTN0810AG976

!

!

hostname "Hostname"

enable password "password"

!

clock timezone -8

!

ip subnet-zero

ip classless

ip routing

ip domain-proxy

ip name-server

!

!

no auto-config

!

event-history on

no logging forwarding

logging forwarding priority-level info

no logging email

logging email priority-level info

!

no service password-encryption

!

username "admin" portal-list " " password "11111"

username "user" portal-list " " password ""

!

!

ip firewall

no ip firewall alg msn

no ip firewall alg h323

!

!

!

!

!

!

!

no dot11ap access-point-control

!

!

!

!

!

!

!

ip crypto

!

crypto ike policy 100

  initiate main

  respond anymode

  local-id address

  peer

  attribute 1

    encryption 3des

    hash md5

    authentication pre-share

!

crypto ike policy 101

  initiate main

  respond anymode

  local-id address

  peer

  attribute 1

    encryption 3des

    hash md5

    authentication pre-share

!

!

!

!

vlan 1

  name "Default"

!

!

interface eth 0/1

  ip address 

  access-policy Public

  crypto map VPN

  no shutdown

  no lldp send-and-receive

!

!

interface switchport 0/1

  no shutdown

!

interface switchport 0/2

  no shutdown

!

interface switchport 0/3

  no shutdown

!

interface switchport 0/4

  no shutdown

!

!

!

interface vlan 1

  ip address  192.168.3.1  255.255.255.0

  access-policy Private

  no shutdown

!

interface modem 0/1

  shutdown

!

!

router rip

  redistribute ospf

  redistribute static

  redistribute connected

  network 10.10.20.0 255.255.255.0

!

!

!

!

!

ip access-list standard wizard-ics

  remark Internet Connection Sharing

  permit any

!

!

ip access-list extended self

  remark Traffic to NetVanta

  permit ip any  any     log

!

  

!

ip access-list extended web-acl-3

  permit tcp any  any eq https   log

  permit tcp any  any eq ssh   log

  permit icmp any  any  echo   log

!

ip policy-class Private

  allow list VPN-20-vpn-selectors stateless

  allow list VPN-10-vpn-selectors1 stateless

  allow list self self

  nat source list wizard-ics interface eth 0/1 overload

!

ip policy-class Public

  allow reverse list VPN-20-vpn-selectors stateless

  allow reverse list VPN-10-vpn-selectors1 stateless

  allow list web-acl-3 self

!

!

!

ip route 0.0.0.0 0.0.0.0

!

no ip tftp server

no ip tftp server overwrite

ip http server

ip http secure-server

no ip snmp agent

no ip ftp server

no ip scp server

no ip sntp server

!

!

!

!

!

!

!

!

!

!

!

!

!

!

line con 0

  login

  password 900824

!

line telnet 0 4

  login local-userlist

  password password

  no shutdown

line ssh 0 4

  login local-userlist

  no shutdown

!

!

!

!

!

end

Anonymous
Not applicable

Re: 3120 firmware upgrade no login afterward

- I noticed that you have portal-lists configured on your router. Are you currently running 17.01.02 as your config states? If so, I would recommend upgrading your firmware and removing the portal-list from your configuration. Please do not hesitate to let us know if you have any questions.

Thanks,

Noor

Anonymous
Not applicable

Re: 3120 firmware upgrade no login afterward

- Were you able to try the above suggestion and log into the 3120? Please let us know if you have any further questions or issues. We will be happy to assist you in any way we can.

Thanks,

Noor

Anonymous
Not applicable

Re: 3120 firmware upgrade no login afterward

-

I went ahead and flagged this post as "Assumed Answered". If any of the responses on this thread assisted you, please mark them as Correct or Helpful as the case may be with the applicable buttons. This will make them visible and help other members of the community find solutions more easily. If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Noor