cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
mohd
New Contributor

Unable to do Auto attendant (night time ring tone)

Jump to solution

Hi Folks!

My Office installed Netwanta 7100 with Polycom IP phones. Netwanta version is 10.7. Im trying to set Auto attendant my office DID number. I already transfer 2 WAV files in to  7100. One is day time and another one is for night time. I follow the Netwanta 7000 series Auto attendant guide. below is the highlighted red set up i got error message. Error shows Invalid number for forward.Verify dial plan templates

Select the Default bar to access the default system mode call coverage. Using the drop-down menu, set Ring this station’s extension to Never. Use the drop-down menu directly below the section divider to

set Then to Go to Auto Attendant. Set the particular auto attendant using the adjacent drop-down menu.

Note: my office works  now day time ring tone. but unable to set night time ring tone. I’ve already uploaded your ftp server a copy of configuration file with SIP stack and voice debug.  They are named  (Unable to do Auto attendant (night time ring tone) .rar)  Any help you can provide is appreciated.  Thanks.

Labels (1)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Unable to do Auto attendant (night time ring tone)

Jump to solution

I believe you are seeing this issue because of the current configuration of your dial plan:


!


---output omitted---


voice dial-plan 2 extensions 3XX


voice dial-plan 8 extensions 347


---output omitted---


!


Typically extensions will be defined by MXX in the dial plan but you are restricting it to 3XX.  Try adding a new entry to match the extension range you put your Auto Attendants in (8XX) or just use MXX instead as a wildcard for any 3 digits.

Thanks,

Matt

View solution in original post

0 Kudos
5 Replies
Anonymous
Not applicable

Re: Unable to do Auto attendant (night time ring tone)

Jump to solution

If you need to have different auto attendants depending on the time of day, the DID should be tied to a virtual user.  Then under the virtual user's coverage you would route to the appropriate auto attendant for the corresponding system mode.  Here are some example screenshots that I hope help clarify.

First go to Voice > User Accounts > click the New and setup a Virtual user:

virtual_user.jpg

After the Virtual user is created, select it from the list followed by the Edit and then setup the DID on the General tab:

did.jpg

Next, click on the Call Coverage tab and select the proper Auto Attendant for the Default system mode:

coverage1.jpg

On the same tab click Night and select the proper Auto Attendant for the Night system mode:

coverage2.jpg

Don’t forget to click the Apply button at the bottom after everything is configured, and then click the Save button after it has been tested and verified to function properly.

Thanks,

Matt

mohd
New Contributor

Re: Unable to do Auto attendant (night time ring tone)

Jump to solution

Matt,

Thanks for your advise.Already tried above steps doesn't allow me to apply. Error shows Invalid number for forward.Verify dial plan templates.

I’ve already uploaded your ftp server a screen shot of error.They are named  Screenshot for error night attendant.docx


Please advise

Anonymous
Not applicable

Re: Unable to do Auto attendant (night time ring tone)

Jump to solution

I believe you are seeing this issue because of the current configuration of your dial plan:


!


---output omitted---


voice dial-plan 2 extensions 3XX


voice dial-plan 8 extensions 347


---output omitted---


!


Typically extensions will be defined by MXX in the dial plan but you are restricting it to 3XX.  Try adding a new entry to match the extension range you put your Auto Attendants in (8XX) or just use MXX instead as a wildcard for any 3 digits.

Thanks,

Matt

0 Kudos
mohd
New Contributor

Re: Unable to do Auto attendant (night time ring tone)

Jump to solution

Matt,

I follow the above steps works now. thanks for your advise.

Anonymous
Not applicable

Re: Unable to do Auto attendant (night time ring tone)

Jump to solution

I'm glad that helped.  Thanks for returning to this post to mark the correct answer and let us know.

Thanks,

Matt