cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

Cannot select Adtran/polycom VVX phone model

Jump to solution

I have a Netvanta 7100 on firmware R10.6.0. When I create a new user, in the phone model dropdown list, I do not see the VVX 3XX/4XX phone model listed. I understood that support for those phones was added in R10.6.0.

In IP Phone Globals, I do see those models listed in order to select the default firmware.

Thank you for you assistance.

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Cannot select Adtran/polycom VVX phone model

Jump to solution

I would suggest loading AOS R10.8.0 as some changes were made for Polycom 300, 310, 400, and 410 VVX phones in that version.  Just a note that only the ADTRAN branded Polycom VVX phones are supported.  If that does not resolve the issue please respond and we can continue troubleshooting from there.

Thanks,

Matt

View solution in original post

0 Kudos
1 Reply
Anonymous
Not applicable

Re: Cannot select Adtran/polycom VVX phone model

Jump to solution

I would suggest loading AOS R10.8.0 as some changes were made for Polycom 300, 310, 400, and 410 VVX phones in that version.  Just a note that only the ADTRAN branded Polycom VVX phones are supported.  If that does not resolve the issue please respond and we can continue troubleshooting from there.

Thanks,

Matt

0 Kudos