3 Replies Latest reply on Feb 15, 2013 11:18 AM by levi

    1335 IP SIP UDP 5060

    cburgamy New Member

      Why will this entry show up in the config if we are not using SIP?

        • Re: 1335 IP SIP UDP 5060
          Employee

          @cburgamy - The command, "ip sip udp 5060" shows up by default in the configuration. It tells the AOS device which port the SIP stack in AOS should operate on, or in other words, which port to expect SIP traffic. By default, this port is defined as UDP port 5060. However, the SIP functionality will not be in effect unless the "ip sip" command is issued. Let us know if you have any further questions.

           

          Thanks,

          Noor

            • Re: 1335 IP SIP UDP 5060
              Employee

              @cburgamy - I went ahead and marked this post as "assumed answered".  Feel free to mark any correct or helpful answers from this post.  If you still need assistance with this issue I would be more than happy to help, just let me know in a reply.

               

              Thanks,

              Noor

            • Re: 1335 IP SIP UDP 5060
              levi Employee

              cburgamy:

               

              I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

               

              Thanks,

               

              Levi