3 Replies Latest reply on Feb 15, 2013 10:54 AM by levi

    How do I turn a port on then off

    sircannon New Member

      How do I turn a port off then back on via the CLI ?  I have done this before but cannot remember ?  I am working a Netvanta 1238.

        • Re: How do I turn a port on then off
          levi Employee

          sircannon:

           

          Thank you for posting this question in the Support Community.  To disable and re-enable a switchport on the NetVanta 1238 you will issue the shutdown followed by the no shutdown commands.  For example:

           

          ROUTER-NAME# configure terminal

          ROUTER-NAME(config)# interface switchport 0/1

          ROUTER-NAME(config-swx 0/1)# shutdown

          ROUTER-NAME(config-swx 0/1)# no shutdown

           

          I hope that makes sense, but please do not hesitate to reply to this post with any additional questions related to this topic.

           

          Levi

          • Re: How do I turn a port on then off
            levi Employee

            sircannon:

             

            I went ahead and marked this post as "assumed answered."  Feel free to mark any correct or helpful answers from this post.  If you still need assistance with this issue I would be more than happy to help, just let me know in a reply.

             

            Levi

            • Re: How do I turn a port on then off
              levi Employee

              sircannon:

               

              I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

               

              Thanks,

               

              Levi