3 Replies Latest reply on May 21, 2012 11:52 AM by matt Branched from an earlier discussion.

    UC not tagging DSCP

    brian_ctl New Member

      I checked and it is enabled.

      On a separate note:

      I have a UC/BCS server at the HQ site and remote users across an mpls WAN topology.  The UC server doesn’t appear to mark any DSCP so I need to use an access list and input qos policy on the mpls router.  Is there any document that lists the udp/rtp ports that will be used?  I didn’t want to just prioritize all packets from the UC server but that is an option.

      Thanks

      Brian