2 Replies Latest reply on Jun 29, 2012 2:17 PM by kalync

    LAN Connection

    therdt New Member

      I manage 2 MX2800's with code version 3.42A.  Our network people are asking us to move the LAN connection to their new Cisco Nexus switches but they only have 100/1000 ports on them and the MX2800 will not connect.  The quick start guide says connect to a 10BaseT connection.  Is there anything I can do other than tell them that I can only connect at 10BaseT?

        • Re: LAN Connection
          tee1up Employee

          The MX2800 only supports a 10Base-T Ethernet connection so it will need to connect to 10B

          ase-T port on your switch.

            • Re: LAN Connection
              Employee

              Since there have been no more questions regarding this post, it has been marked as "Assumed Answered". Please feel free to mark any correct or helpful answers that may have assisted you. If you still need assistance, please let us know and we will be more than happy to continue working with you.

               

              Thank you,

              kalync