3 Replies Latest reply on Jun 25, 2012 11:28 AM by dcorrea

    NV7100 Remote Registration Problem

    dcorrea Visitor

      Hello Guys,

       

      How are you!?, I'm writing you for ask about an issue with a softphone that I want to register over the WAN to my NV7100, I did the config on the softphone (attached image of this) but at the time that I enable the account the following messages appear on the NV7100:

       

      NV7100#

      23:13:32.723 SIP.STACK MSG     Rx: UDP src=XXX.XXX.XXX.XXX:39556 dst=192.168.15.167:5060

      23:13:32.723 SIP.STACK MSGSUM  Rx: REGISTER sip:XXX.XXX.XXX.XXX SIP/2.0

      23:13:32.723 SIP.STACK MSG         REGISTER sip:XXX.XXX.XXX.XXX SIP/2.0

      23:13:32.723 SIP.STACK MSG         Via: SIP/2.0/UDP 10.0.1.241:29928;branch=z9hG4bK-d8754z-e0170b2e1e687917-1---d8754z-;rport

      23:13:32.723 SIP.STACK MSG         Max-Forwards: 70

      23:13:32.724 SIP.STACK MSG         Contact: <sip:2173@10.0.1.241:29928;rinstance=2978e407f12d836c;transport=udp>

      23:13:32.724 SIP.STACK MSG         To: "2173"<sip:2173@XXX.XXX.XXX.XXX>

      23:13:32.724 SIP.STACK MSG         From: "2173"<sip:2173@XXX.XXX.XXX.XXX>;tag=ff2c5078

      23:13:32.724 SIP.STACK MSG         Call-ID: ODVmMDg0MTM5MzY2NDBiMWMzOGNlYTZjN2E3M2JhNmY.

      23:13:32.724 SIP.STACK MSG         CSeq: 1 REGISTER

      23:13:32.724 SIP.STACK MSG         Expires: 3600

      23:13:32.724 SIP.STACK MSG         Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO

      23:13:32.725 SIP.STACK MSG         User-Agent: X-Lite 4 release 4.1 stamp 63215

      23:13:32.725 SIP.STACK MSG         Content-Length: 0

      23:13:32.725 SIP.STACK MSG   

      23:13:32.728 SIP.STACK MSG     Tx: UDP src=192.168.15.167:5060 dst=XXX.XXX.XXX.XXX:39556

      23:13:32.728 SIP.STACK MSGSUM  Tx: SIP/2.0 501 Not Implemented

      23:13:32.728 SIP.STACK MSG         SIP/2.0 501 Not Implemented

      23:13:32.728 SIP.STACK MSG         From: "2173"<sip:2173@XXX.XXX.XXX.XXX>;tag=ff2c5078

      23:13:32.728 SIP.STACK MSG         To: "2173"<sip:2173@XXX.XXX.XXX.XXX>;tag=527a070-7f000001-13c4-9780-14f08dda-9780

      23:13:32.728 SIP.STACK MSG         Call-ID: ODVmMDg0MTM5MzY2NDBiMWMzOGNlYTZjN2E3M2JhNmY.

      23:13:32.729 SIP.STACK MSG         CSeq: 1 REGISTER

      23:13:32.729 SIP.STACK MSG         Via: SIP/2.0/UDP 10.0.1.241:29928;received=189.143.120.180;rport=39556;branch=z9hG4bK-d8754z-e0170b2e1e687917-1---d8754z-

      23:13:32.729 SIP.STACK MSG         Content-Length: 0

      23:13:32.729 SIP.STACK MSG   

       

      It seems that the REGISTER option is not available on the NV so that's why is sending the 501 Not Implemented.

       

      If it's useful, I'm attaching the image of the config of the softphone and the config file of the NV7100

       

      Would you help me here,

       

      Thanks a bunch!!!

       

      Message was edited by: matt - removed configuration with sensitive information

        • Re: NV7100 Remote Registration Problem
          Employee

          dcorrea,

           

          I removed your configuration file from the post as it had an e-mail address listed for the e-mail logging.  I saw that ip sip registrar was included in your configuration and and media-gateway ip primary was on most interfaces (but not all).  Those are some common things to check.  Is the register message coming in on one of the ATM sub-interfaces or the eth 0/0 interface?  Is there some SIP device or NAT device upstream of the 7100? If so a complete network diagram may help.  Also, can you include the output of a debug sip user-registration in addition to a debug sip stack messages?  It is more common (and secure) to use a VPN client on the PC and register the softphone over a VPN tunnel.  Is that an option?

           

          Thanks,
          Matt

            • Re: NV7100 Remote Registration Problem
              Employee

              dcorrea,

               

              I saw you opened a ticket for this and the result was that there was an ONT device ahead of the 7100 that was not SIP aware so it was not translating the IP address in the SIP Register message to the proper IP address on the NetVanta 7100.  Our suggestion was to correct that or use a VPN to connect to the NetVanta 7100 and register directly over the tunnel.  I went ahead and marked this post as "Assumed Answered".

               

              Thanks,
              Matt

                • Re: NV7100 Remote Registration Problem
                  dcorrea Visitor

                  Dear Matt,

                   

                  Sorry for my late answer here, that's correct the problem was that the ONT in front of my NV7100 is not a SIP aware device. What I did to solve this was talk with my ISP and he assign me a Public IP Address for my NV.

                   

                  Thanks a lot for the help here and with the ticket