-
Re: Rate Shaping on NV 1234?
wes.carper Jul 19, 2012 1:52 PM (in response to greenlight2012)I believe you can rate shape in the ingress direction only. I had a similar need and had to go to a Cisco 2960 using service policy's and srr-queue to apply the shaping to the interface.
-
Re: Rate Shaping on NV 1234?
greenlight2012 Jul 19, 2012 1:59 PM (in response to wes.carper)Wes,
Thanks for the quick reply. I assume you need to do that in the CLI for the ingress. What command did you use? That might be enough to get my through my short term issue.
Regards,
Mark
-
Re: Rate Shaping on NV 1234?
unified Jul 19, 2012 2:07 PM (in response to greenlight2012)1 of 1 people found this helpfulIf you need a temporary solution just set the port to 10 mb.
-
Re: Rate Shaping on NV 1234?
greenlight2012 Jul 20, 2012 7:33 AM (in response to unified)unfortuately that won't work...need 20Mbps
-
-
Re: Rate Shaping on NV 1234?
wes.carper Jul 20, 2012 8:29 AM (in response to greenlight2012)1 of 1 people found this helpfulHey,
Just got into one of my 1238's to check on that. I believe that I was mistaken. There doesn't seem to be a way to do it on this switch per port. I must have been thinking of a different switch that I was testing at the time. I went through several different models/brands to find the right one for me to be able to do per port rate limiting. In the end the 2960 was the best option I could find. There's an HP/3COM 3600 switch that does it very nicely but it's a bit pricey.
-
-
-
Re: Rate Shaping on NV 1234?
unified Jul 19, 2012 1:58 PM (in response to greenlight2012)Hi greenlight2012,
Let me know if this post answers your question: Bandwidth Throttling on NetVanta switchports or per VLAN?
Thank you,
-
Re: Rate Shaping on NV 1234?
greenlight2012 Jul 20, 2012 7:34 AM (in response to unified)it answered my question, thanks. unfortunately, I need this at the port level, not vlan level...
-
Re: Rate Shaping on NV 1234?
unified Jul 20, 2012 7:43 AM (in response to greenlight2012)1 of 1 people found this helpfulI don't think the 1234 does Port-based VLANs.
You will have to upgrade to the 1534.
-
Re: Rate Shaping on NV 1234?
greenlight2012 Jul 20, 2012 7:46 AM (in response to unified)You're right...thanks...
-
Re: Rate Shaping on NV 1234?
noor Jul 30, 2012 9:17 AM (in response to greenlight2012)1 of 1 people found this helpfulI went ahead and flagged this post as “Assumed Answered.” If any of the responses on this thread assisted you, please mark them as either Correct or Helpful answers with the applicable buttons. This will make them visible and help other members of the community find solutions more easily. If you still need assistance, I would be more than happy to continue working with you on this - just let me know in a reply.
Thanks,
Noor
-
Re: Rate Shaping on NV 1234?
greenlight2012 Jul 31, 2012 5:09 AM (in response to noor)thank you! I've learned that bandwidth shaping is on the product roadmap, but it isn't available with my current product.
-
-
-
-
-