8 Replies Latest reply on Aug 15, 2012 9:27 AM by jjimbopp

    telnet and console

    mattb New Member

      Have a strange thing going on with two MX410's.    Every few days both will not allow telnet connections and if I connect up to the Console port, it will different things, such as:

       

      1 - Nothing, no prompt

      2- login prompt, can type, but nothing happens after hitting return.

      3 - garbage characters appear and it hangs Terminal

       

      When telnet to it, it will do basically the same thing, but typically the garbage character is a ¥.

       

      Power it down for 30 seconds and power it back up it works fine.