2 Replies Latest reply on Aug 16, 2012 5:04 PM by andrewd

    Set SIP privacy based on blank PRI calling number

    andrewd New Member

      We are using a 908e to bridge between a PBX and an ITSP. The PBX is connected via PRI and the ITSP is connected via a SIP trunk. When a phone on the PBX is configured to block caller ID, we get a call setup like this:

      M - 05 SETUP
               ...
        IE - 6C CALLING PARTY #     Len=2
             00 Numb. Type:UNKNOWN      
                Numb. Plan:UNKNOWN       
             80 Presentation:ALLOWED    
                Ph.#

      Unfortunately the PBX is unable to set the Presentation to RESTRICTED. However, the ITSP requires the outgoing call have the Privacy header set to something other than none. Ideally we would have the INVITE to look like:

       

      INVITE sip:8005550123@4.3.2.1:5060 SIP/2.0

      From: "Private" <sip:anonymous@4.3.2.1:5060;transport=UDP>;tag=3bbb6c8-7f000001-13c4-715-77cb95df-715

      To: <sip:8005550123@4.3.2.1:5060>

      Call-ID: 3bfca98-7f000001-13c4-715-7e4307e7-715@4.3.2.1

      CSeq: 1 INVITE

      Via: SIP/2.0/UDP 1.2.3.4:5060;branch=z9hG4bK-715-1bac7d-45832753

      Max-Forwards: 70

      Proxy-Require: privacy

      Privacy: user

      P-Asserted-Identity: <sip:5555550123@4.3.2.1:5060;transport=UDP>

      Supported: 100rel,replaces

      Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, PRACK, REFER, REGISTER

      User-Agent: ADTRAN_Total_Access_908e_2nd_Gen/A5.03.00.E

      Contact: <sip:anonymous@1.2.3.4:5060;transport=UDP>

       

      Instead of what we have now:

       

      INVITE sip:8005550123@4.3.2.1:5060 SIP/2.0

      From: <sip:4.3.2.1:5060;transport=UDP>;tag=3bbb6c8-7f000001-13c4-715-77cb95df-715

      To: <sip:8005550123@4.3.2.1:5060>

      Call-ID: 3bfca98-7f000001-13c4-715-7e4307e7-715@4.3.2.1

      CSeq: 1 INVITE

      Via: SIP/2.0/UDP 1.2.3.4:5060;branch=z9hG4bK-715-1bac7d-45832753

      Max-Forwards: 70

      Proxy-Require: privacy

      Privacy: none

      Supported: 100rel,replaces

      Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, PRACK, REFER, REGISTER

      User-Agent: ADTRAN_Total_Access_908e_2nd_Gen/A5.03.00.E

      Contact: <sip:1.2.3.4:5060;transport=UDP>

       

      Basically we want the same result described in "Blocking Outbound Caller ID from a PRI in AOS Voice Devices.pdf" only determined by having an empty Calling Party Number rather than Presentation: RESTRICTED.

       

      I tried several ways of doing this including match dnis "" replace ani "anonymous" and setting up two SIP trunks and matching based on ani "", but nothing seems to allow me to match an empty string or replace with a non-numeric string.

       

      Is this doable, and how would I implement it?

        • Re: Set SIP privacy based on blank PRI calling number
          david Employee

          Andrewd,

           

          Unfortunately, these SIP header changes will not be possible with a match and substitute command.  If the PBX cannot send presentation set to RESTRICTED, our only option would be to utilize our HMR feature defined in Manipulating SIP Headers and Messages in AOS.  This feature will allow us to modify SIP headers based on regular expressions.  Since the firmware required for this feature is not available for download on our website yet, you will need to create a normal Technical Support ticket by calling 888-423-8726 and request the current R10 release.

           

          Thanks!

          David

            • Re: Set SIP privacy based on blank PRI calling number
              andrewd New Member

              Thanks David, that's a pretty awesome feature. It did exactly what I needed:

               

              hmr rule-set PrivateWorkaround
                 message-rule Rule1 message-type request 10
                   match header from match-value /(<sip:)([^@]+)>/
                   modify header from position first match-value /(<sip:)([^@]+)>/ new-value "/\x22Anonymous\x22  \1anonymous@\2>/" 10
                   modify header contact position first match-value /(<sip:)([^@]+)>/ new-value /\1anonymous@\2>/ 15
                   modify header privacy position first new-value /user/ 20