4 Replies Latest reply on Feb 15, 2013 2:39 PM by matt

    Adtran 706/712 Speed Dial Buttons

    adpena1969 New Member


      I have a client that has 40 706 phones and 25 712 phones.  They would like the same speed dial buttons on each series of phones.  Is there a faster way to create the speed dial buttons instead of going to each individual phone in IP Phone Config??

        • Re: Adtran 706/712 Speed Dial Buttons
          brian_ctl New Member

          There is a way but it may not be supported.

          Use Status groups, if you want to dial a pstn number create a virtual user account 9nxxnxxxxxx and you will see it in the user list to assign.

          You still have to assign the status group to every phone config but it would be easier to update once it is assigned to the sets.

          • Re: Adtran 706/712 Speed Dial Buttons
            james_ucs Employee

            adpena1969 wrote:

             


            I have a client that has 40 706 phones and 25 712 phones.  They would like the same speed dial buttons on each series of phones.  Is there a faster way to create the speed dial buttons instead of going to each individual phone in IP Phone Config??

            Unfortunately, here isn't a way to apply it to every phone without touching every phone in the IP Phone Configs page.

            • Re: Adtran 706/712 Speed Dial Buttons
              Employee

              I went ahead and flagged this post as "Assumed Answered". If any of the responses on this thread assisted you, please mark them as Correct or Helpful as the case may be with the applicable buttons. This will make them visible and help other members of the community find solutions more easily. If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

               

              I also wanted to add a note that another option may be to define numbers on the Voice > System Setup > System Speed Dial page of the web interface.  Users could access these by dialing the SPRE *25nn where nn=the system speed dial entry.  For example if speed dial number 1 was setup to be 2565551111 anyone could dial that number via the SPRE code *2501 from their phone, assuming their class of service allowed it.  The normal_users class of service allows system speed dials by default. 

               

              Thanks,
              Matt

              • Re: Adtran 706/712 Speed Dial Buttons
                Employee

                I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

                 

                Thanks,

                Matt