3 Replies Latest reply on Oct 31, 2012 2:07 PM by david

    Call Timeout

    kurttsc New Member

      When placing a outbound call from the Adtran 916 the line will alert for 2 1/2 minutes.  I adjusted the Voice Timeouts Alerting to 1 minute, but call still alerts for 2 1/2 minutes.

        • Re: Call Timeout
          david Employee

          Kurttsc,

           

          Thanks for posting!  We will need to see the debug output to understand how we might be able to prevent this.  Please send us a copy of the configuration and the output of the following debug commands for a given test call.

           

          debug sip stack message

          debug sip cldu

          debug voice verbose

          debug isdn L2-formatted

          debug interface fxs

           

          We do not want sensitive information available on the forum, so may sure to remove all passwords, phone numbers, etc. from the configuration and log files before submission.

           

          Thanks!

          David

          • Re: Call Timeout
            david Employee

            Kurttsc,

             

            I just wanted to follow up with you to see if you were still experiencing this issue.  Please let me know if I can be of assistance.  We will just need to see that debug output in order to provide a recommendation.

             

            Thanks!

            David

            • Re: Call Timeout
              david Employee

              Kurttsc,

               

              I went ahead and flagged this post as "Assumed Answered".  If the response on this thread assisted you, please mark it as Correct or Helpful as the case may be with the applicable buttons.  This will make it visible and help other members of the community find solutions more easily.  If you still need assistance, I would be more than happy to continue working with you on this - just let me know in a reply.

               

              Thanks!

              David