2 Replies Latest reply on Oct 22, 2012 2:46 PM by noor

    VLans on the NV 1238 POE

    ing_gomez_clevermx New Member

      Good aftgernoon forum, I have the next issue:

       

      I created 3 VLans on my 1238, when I configure one of them and tur it by "no shu" the other VLans change to down (shutdown), when I do it by GUI I get the same result, there is an advice that tells me that the other VLANS will be turned off.

       

      What can i do?

        • Re: VLans on the NV 1238 POE
          Employee

          ing_gomez_clevermx - The NetVanta 123x switches can support multiple VLANs. However, it can only have one VLAN interface active at a time. It sounds like you are attempting to create multiple VLAN interfaces instead of multiple VLANs. When you enable a VLAN interface when another VLAN interface is already active, the new VLAN interface will become active, and the previous one will automatically shut down. The VLAN interface on the 123x switch is used for primary for administrative purposes.

           

          More information on how to configure VLANs and VLAN interfaces can be found in the following thread: Re: How to create a VLAN on Netvanta 1234

           

          Please do not hesitate to let us know if you have any questions.

           

          Thanks,

          Noor

            • Re: VLans on the NV 1238 POE
              Employee

              ing_gomez_clevermx -

              I went ahead and flagged this post as “Assumed Answered.”  If any of the responses on this thread assisted you, please mark them as either Correct or Helpful answers with the applicable buttons.  This will make them visible and help other members of the community find solutions more easily.  If you still need assistance, I would be more than happy to continue working with you on this - just let me know in a reply.


              Thanks,

              Noor