3 Replies Latest reply on Jan 13, 2013 9:02 AM by supr

    Reset 900 from bootstrap

    tazz29063 New Member

      From bootstrap menu, what is the command to reset unit.

        • Re: Reset 900 from bootstrap
          unified Past_Featured_Member

          What I normally do is format the file system and reload the firmware and config file.

          See:

          http://voip4ea.com/2012/01/20/how-to-factory-reset-and-upgrade-the-firmware-on-the-adtran-total-access-900-series-gateways/

            • Re: Reset 900 from bootstrap
              unified Past_Featured_Member

              Looks like the default config is missing from the link above.

              You can use the following

               

              !

              enable password password

              !

              ip subnet-zero

              ip classless

              ip domain-proxy

              ip routing

              !

              event-history on

              no logging forwarding

              no logging email

              logging email priority-level info

              !

              username "admin" password "password"

              !

              banner motd #

               

                      Important 

                     

              Web username/password is configured to admin/password.

              Enable and Telnet passwords are configured to "password".

              Please change them immediately.

               

              The ethernet 0/1 interface is enabled with an address of 10.10.10.1

              Telnet/SSH access is also enabled.

              #

              !

              !

              no ip firewall alg h323

              !

              !

              !

              !

              !

              !

              ip dhcp-server pool "Private"

                network 10.10.10.0 255.255.255.0

                netbios-node-type h-node

                default-router 10.10.10.1

                lease 1

              !

              !      

              !

              interface eth 0/1

                ip address  10.10.10.1  255.255.255.0

                no shutdown

              !

              !

              !

              interface t1 0/1

                no shutdown

              !

              interface t1 0/2

                shutdown

              !

              !

              !

              !

              !

              !

              ip telnet-server 23

              ip ssh-server 22

              no ip tftp server

              ip http server

              ip http secure-server

              no ip snmp agent

              no ip ftp agent

              !

              !

              !

              !

              !

              !

              !

              voice feature-mode network

              !

              !

              !

              !

              !

              !

              !

              ip sip

              !

              line con 0

                no login

              !      

              line telnet 0 4

                login

                password password

                no shutdown

              line ssh 0 4

                login local-userlist

                no shutdown

              !

              end

              1 of 1 people found this helpful