5 Replies Latest reply on Feb 15, 2013 2:56 PM by matt

    ¿how to erase flash and cflash?

    francisco New Member

      Hi everybody..

       

            I have a doubt, is there a way to setup the memory flash and cflash to default factory or erase the memories flash and cflash completely?? couse my memory flash and cflash have a lot of files and I don´t know that I must to erase..

       

      regards...

          • Re: ¿how to erase flash and cflash?
            francisco New Member

            Hi,

             

            thanks for your comments but is not excatly that I´m looking for, in your document just erase the starup config but not the flash and cflash memories.

             

            I found this commands:

             

            erase cflash <filename>

            erase flash <filename>

             

            but just erase file to file and not completely the memories, do you have or exist another command to do that???

             

            regards!!

              • Re: ¿how to erase flash and cflash?
                jay Employee

                Francisco, you can use the commands "erase file-system flash" and "erase file-system cflash" to totally wipe the file systems of both. Theoretically, when the system boots back up with a firmware image uploaded, critical files should be extracted automatically. I would suggest loading 10.3.2 or 10.5.0 onto the 7100 after the format as those versions contain the default config files. Thanks

                 

                Jay

            • Re: ¿how to erase flash and cflash?
              Employee

              I went ahead and flagged this post as "Assumed Answered". If any of the responses on this thread assisted you, please mark them as Correct or Helpful as the case may be with the applicable buttons. This will make them visible and help other members of the community find solutions more easily. If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

               

              Thanks,

              Matt

                • Re: ¿how to erase flash and cflash?
                  Employee

                  I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

                   

                  Thanks,

                  Matt