8 Replies Latest reply on Dec 12, 2012 2:23 PM by jimvad

    Add New VPN - Netvanta 3448

    jimvad New Member


      I'm new to Adtran and need help adding a VPN to our Netvanta 3448.

       

      I'm logged in but see absolutely nowhere to even view the old VPNs, much less add a new one.

       

      Any help would be much appreciated.  Thanks!

        • Re: Add New VPN - Netvanta 3448
          levi Employee

          jimvad:

           

          Thank you for asking this question in the support community.  I will be happy to assist you, but I need some additional information.  Does the ADTRAN unit already have VPNs configured and you are going to add additional VPNs?  Are you using the web interface to configure the units?  If the unit does not have any VPNs currently configured, you should verify that the ADTRAN unit is capable of VPNs.  You can determine that from the following post:  Identifying whether or not I have Enhanced Feature Pack

           

          Typically, most people use the VPN Wizard in the web interface to add new VPNs.  You gave navigate to the following:  Data > VPN > VPN Wizard

           

          For additional reference, here is a guide on how to Configure Main Mode VPN in AOS (VPN when both sides have static IP addresses).  Here is a guide on how to Configure Aggressive Mode VPN in AOS (VPN when one side has dynamic/changing IP addresses).

           

          Please, let me know what questions you have.  I will be happy to help in any way I can.

           

          Levi

            • Re: Add New VPN - Netvanta 3448
              jimvad New Member

              Thanks for the reply Levi.

               

              This unit already has VPNs setup; I'm just adding a new one.  However when i logon via the web interface, I don't see any wizards or even the Data link you referred to in your post.  There are three sections on the page I land on after logging in:

              System Information

              Ethernet Summary

              Port Summary

               

              Am I missing something?

               

              Thanks!

                • Re: Add New VPN - Netvanta 3448
                  levi Employee

                  jimvad:

                   

                  The information you are referring to is what shows up when you have selected "System Summary" on the left side menu under the "System" setting.  The left menu structure should be similar to:  System - Data - Monitoring - Utilities.  You will need to click the "+" beside "Data" and then navigate under the "Data" sub-menu to VPN > VPN Wizard.  Then when you click on "VPN Wizard" on the left menu, it will load it on your screen.

                   

                  I hope that helps, but let me know if I am missing something.

                   

                  Levi